alimgazin_ash@enu.kz
01.09.1975 - 02.10.1980 - "Pavlodar Industrial Institute", full-time student of the Faculty of Energy
11.11.1980 - 10.02.1982 - "Plant-Higher Technical Educational Institution at Karmetkombinat, Temirtau, Karaganda Region", Lecturer at the Department of Hydraulics, Water Supply and Sewerage
02.10.1982 - 30.11.1984 - "Moscow Power Engineering Institute", Research Intern, TMPU Department
01.12.1984 - 30.11.1987 - "Moscow Power Engineering Institute", full-time postgraduate student of the TMPU department
28.12.1987 - 20.06.1989 - "Plant-VTUZ at Karmetkombinat", Lecturer at the Department of Metallurgical Heat Engineering and Occupational Safety
20.06.1989 - 31.10.1989 - "Plant-VTUZ at Karmetkombinat", Senior Lecturer, Department of MT and OT
31.10.1989 - 14.05.1991 - "Plant-VTUZ at Karmetkombinat", Associate Professor of the Department of Industrial Thermal Power Engineering, Metallurgical Thermal Engineering and Life Safety
29.12.1992 - 18.01.1993 - "Plant-VTUZ at Karmetkombinat", Head of the Department of Industrial Thermal Power Engineering and Metallurgical Thermal Engineering
20.01.1993 - 25.12.1998 - "TOO "Multi-profile small enterprise "Altamar" (Temirtau)", director, founder
06.09.2000 - 03.09.2003 - ""East Kazakhstan State University named after D. Serikbaev" (Ust-Kamenogorsk)", Associate Professor of the Department of "Rational Use of Air-Water Basin and Heat and Gas Supply", later "Industrial Thermal Power Engineering"
01.06.2006 - 15.07.2006 - ""East Kazakhstan State University named after D. Serikbaev" (Ust-Kamenogorsk)", Head of the Department of Industrial Power Engineering
06.06.2006 - 25.12.2006 - ""East Kazakhstan State University named after S. Amanzholov", Ust-Kamenogorsk", Vice-Rector for Research and International Cooperation
26.12.2006 - 06.04.2007 - "TOO "Scientific and Production Firm KazEcoTerm" (Astana)", Director and Founder
07.04.2007 - 30.07.2012 - "JSC "Kazakh Agrotechnical University named after S.Seifullin" (Astana)", Associate Professor of the Department of Thermal Power Plants, later the Department of Thermal Power Engineering
01.09.2012 - until now - "NAO "L.N. Gumilyov Eurasian National University" (Astana)", Professor of the Department of Thermal Power Engineering, Director of the Research Institute of Energy Saving and Energy Efficient Technologies
2017 - badge of the Ministry of Energy “Kurmetti Energetic” (Honorary title of the RK)
2023 - Academician of the International Academy of Refrigeration (St. Petersburg) (Membership in Academies)
2017 - Certificate of Honor of the Minister of Energy (Diplomas of the ministries and departments)
2022 - Certificate of honor of the Minister of Science and Higher Education of the Republic of Kazakhstan S. Nurbek (Diplomas of the ministries and departments)
2023 - Certificate of Honor of the President of the Academy of Military Sciences of the Republic of Kazakhstan (Diplomas of the ministries and departments)
scientific school for conducting research and training specialists in the field of application of heat transformation technologies (heat pumps, refrigeration machines) using non-traditional/alternative and renewable energy sources
Conducting research and training specialists in the field of application of heat transformation technologies (heat pumps, refrigeration machines) using non-traditional/alternative and renewable energy sources
Numerical modeling of heat and mass transfer processes in industrial heat power engineering and heat technology devices
Conducting energy audits and developing energy passports for social facilities, housing and communal services, and industrial facilities
Bachelor:
2012:- - Occupational health and inplant safety (OHIS 3211)
- - Fundamentals of Life Safety (FLS 1113)
- - Fundamentals of Life Safety (OBZh 2111)
- - Ecology of Engineering (IE 4305)
- - Design, installation and using of renewable energy sources (PMEUVIE 3305)
- - Energy-saving in heat power engineering and thermal technologies (ETETT 4315)
- - Thermal and nuclear power plants (TNPP 3234)
- - Energy conservation and energy audit in thermal power generation and metallurgy (EATPM 3235)
- - Energy efficiency in thermal power generation and metallurgy (ENEM 3237)
- - Non-traditional and renewable energy sources (NRES 2225)
- - Fluid and gas mechanics (MLG 2212)
- - Heat and mass transfer (HAMT 2205)
- - Alternative energy sources (AES 2226)
- - Theoretical fundamentals of Thermal engineering (TOT 2206)
- - Energy Efficiency and Energy Audits of Industrial Enterprises (EEEAIE 4205)
- - Technical thermodynamics (ET 2207)
- - Unconventional and renewable energy sources in industry (URESI 3211)
- - Superchargers, heat engines and turbogenerators of steam-gas and gas turbine installations (SHETSGTI 3215)
- - Energy saving and energy audit of heat and power processes (ESEAHPP 3307)
- - Chemical control at thermal and nuclear power plants (ChCTNPP 3212)
- - Renewable energy sources
- - Non-traditional and renewable energy sources (NRES 4311)
- - Alternative energy
- - High temperature processes and plants
- - Alternative energy engineering
Master (scientific-pedagogical):
2012:- - Research problems of heat-energy and heat-technologies (NTPTT 51005)
- - Nature guard technologies during the working of heat-energy units
- - Modeling of the processes and unites at the energy and heat-technologies
- - Peculiarities of using and industrial tests of units of renewable energy sources (OEPIUVIE 63021)
- - (POATEP 63024)
- - Energy auditing (EA 5211)
- - Energy auditing (EA 63017)
- - Research problems of thermal engineering and technologies (RPHE 5301)
- - Environmental technologies in industrial power engineering (IHPE) (ETIT 5309)
- - Innovative technologies and projects management (ITPM 5204)
- - Engineering experiment (EE 5206.)
- - Research and innovation action (RIA 5208)
- - Application of heat pump technology (TPP) (AHPT 5302)
- - Industrial tests, adjustment and variable modes of the heat power equipment of the industrial enterprises and housing of communal services (ITAVM 6305)
- - Industrial tests, adjustment and variable modes of equipment of thermal and nuclear power plants (ITAVMETNPP 6305)
- - Design, installation and operation of renewable energy units (DIOREI5303)
- - The use of renewable energy sources in thermal power equipment (URESHPP 5303)
- - BIM technology (BIMT 6309)
- - Use of secondary energy resources of industrial enterprises and power plants (USERIEPP 5301)
- - Development and management of energy projects (DMEP 5204)
- - Improving the energy efficiency of industrial enterprises and utilities (IEEIEU 6307)
- - Computational fluid dynamics
- - Numerical methods for solving thermal power problems
- - Design and operation of renewable energy installations
- - Computational fluid dynamics
- - Physical and mathematical modeling of thermal power processes
- - Numerical methods in the field of RES
Master (specialized):
2016:- - Renewable energy: ways of increase of the energy and economic efficiency (REWI 5307)
- - Features of water-chemical regimes of TPP and heat networks (FWCR 5313)
- - Ways of innovative heat pump technology using for improving the efficiency of heat and cold supply of various objects in the Republic of Kazakhstan (WIPT 5316)
- - Fundamentals of design and operation of new energy saving technologies with using the heat pumps in heating systems of domestic, public and industrial buildings (FDON 5317)
- - Features of the using of non-traditional energy sources and secondary energy resources of industrial enterprises (FUNESSERIE 5308)
- - Ways of application of innovative heat pump technologies for using of low-potential heat of thermal power plants (WAIHPTULHTPP 5313)
- - Improving of the energy efficiency of industry (IEEI 5310)
- - Alternative energy sources and secondary energy sources in industry (AESS 5308)
- - Special course on energy systems and heat networks (SCES 5312)
Doctor PhD:
2020:- - Theoretical and applied studies of operating modes of renewable energy installations (TASOMREI 8305)
- - Theoretical and applied research of the processes of utilization of secondary energy resources and production wastes (TARPUSERPW 8303)
- - Computer modeling of heat and power processes
- - Computer modeling of heat and power processes
1. BIM modeling for life cycle of building: Modern realities and development demands in Russia.
Aip Conference Proceedings. 2023
2. DEVELOPMENT OF A TECHNOLOGICAL SCHEME OF A WASTE-FREE BIOENERGY PLANT FOR THE DISPOSAL OF WASTE.
News of the National Academy of Sciences of the Republic of Kazakhstan Series of Geology and Technical Sciences. 2023
3. Prospects for the use of absorption cooling and heating technologies to improve the energy efficiency of various facilities in the Republic of Kazakhstan.
Aip Conference Proceedings. 2022
4. Research and development of seasonal heat and ice storage for energy supply system of building.
Aip Conference Proceedings. 2022
5. Autonomous power supply of objects in rural settlements of Pavlodar region using alternative energy sources.
Bio Web of Conferences. 2022
6. Heat pump in a new modular configuration to recover low-grade heat emissions at enterprises.
E3s Web of Conferences. 2020
7. Improving Energy and Environmental Efficiency of Combined Heat-and Power Plant Based on Absorption Heat Transformers.
E3s Web of Conferences. 2020
8. The use of heat transformers for the low-temperature secondary energy resources recovery in non-ferrous metallurgy enterprises.
E3s Web of Conferences. 2020
